[Bonus] 1 pack of 10 14-needle tips, suitable for Dr. Pen A20 Advanced Microneedle Pen
· Certification：FDA 510(k)、CE、RoHS
How to use
Microneedling treatment regimen – for professional use only
Step 1: Disinfect and open the needle case cap. Check the integrity of the packaging. Remove the sterile cap immediately before use. Make sure the needle cartridge is not expired and undamaged.
Step 2: Install the needle box onto the device. Align with the needle cartridge, then snap into the A20 handle. Before starting, step away from the customer for testing and ensure the needle is evenly extended.
Step 3: Double cleaning and preparing the client. Use an oil-based cleanser to remove all cosmetics, sunscreen, and residue, then apply a gentle foaming cleanser. Tie your hair tight.
Step 4: Set needle depth and speed. Select appropriate parameters based on the treatment area and the client's skin type. Start conservatively with the first use, adjusting according to skin reactions.
Step 5: Apply hyaluronic acid serum in specific areas. Before acupuncture in the area, apply an adequate amount of medical-grade hyaluronic acid serum. Supplements are needed during treatment.
Step 6: Multi-directional puncture and needling. With gentle and even pressure, the pen tip slides vertically, horizontally, and diagonally. Each direction is typically 3-4 punctures. The equipment motor drives the needle to penetrate; do not press forcefully.
Step 7: Discard the needle case. Remove the used needle case and immediately dispose of it into the approved sharps container. Single-use only; Reuse seriously violates infection control regulations. Disinfect the handle according to the guidelines.
After treatment: Apply a soothing serum or mask. Customers are advised to avoid sunlight, heat sources, active ingredients, and cosmetics for 24-48 hours. Provide written care instructions and record treatment information.
Usage frequency: once every 4-6 weeks. Noticeable effects are usually seen in the first two treatments.
